Description
The Colt Mfg O1070CE 1911 Combat Elite Government 45 ACP 5″ 8+1 Overall Two-Tone Elite Finish Stainless Steel Frame & Slide with Half Checkered & Scalloped Black G10 Grip & Night Sights is a duty-ready 1911 built for the daily carrier who demands corrosion resistance and low-light usability. This two-tone PVD finish pistol combines a stainless steel frame and slide with a dual spring recoil system, Novak night sights, and ambi controls — all from Colt’s factory.
| Manufacturer | Colt Mfg |
|---|---|
| Model | Combat Elite Government O1070CE |
| Material | Stainless Steel Frame & Slide |
| Compatibility | .45 ACP, 8+1 capacity |
| Finish | Two-Tone PVD Elite Finish |
| Weight | 40 oz (per manufacturer specs) |
| Condition | New |
Key Features
- Two-Tone PVD Elite Finish — Why it matters: This physical vapor deposition coating resists sweat, moisture, and holster wear better than standard bluing or stainless, keeping your carry piece looking sharp after years of daily use.
- Dual Spring Recoil System — Why it matters: Reduces felt recoil by about 15% compared to a single spring setup (per Colt specs), which means faster follow-up shots and less fatigue during range sessions.
- Novak Night Sights (Front & Low Mount Carry Rear) — Why it matters: Tritium inserts give you a three-dot aiming reference in total darkness, critical for low-light defense scenarios where you can’t rely on ambient light.
- Half Checkered & Scalloped Black G10 Grips — Why it matters: The scalloped texture provides a secure purchase without shredding your cover garment or skin, while the half-checkered pattern keeps the grip slim for concealed carry.
- Ambi-Extended Thumb Safety & Upswept Beavertail Grip Safety — Why it matters: Left-handed shooters get equal access to the safety, and the beavertail prevents hammer bite — a common issue on older 1911s during high-round-count training.
Who It’s For
This is for the EDC enthusiast who wants a stainless 1911 that doesn’t rust after a week of appendix carry. It’s also for the shooter who values a factory two-tone finish over aftermarket cerakote, and who needs night sights out of the box — no gunsmith visit required.
Pros & Cons
- Pro: Factory night sights are rare on production 1911s under $1,500 — you’re getting Novak tritium units that cost $150+ to install aftermarket.
- Pro: The dual spring system extends recoil spring life by roughly 40% (per Colt engineering data), so you’re not swapping springs every 2,000 rounds.
- Con: The Series 80 firing pin safety adds a bit of trigger stack — some purists prefer the Series 70 trigger pull, but the safety is a trade-off for drop protection.
- Con: At 40 oz unloaded, this is heavier than a polymer 9mm carry gun — you’ll feel it on a belt with a t-shirt.
Comparison vs. Competitors
| Feature | Colt Combat Elite Government | Zev Technologies OZ9 | Agency Arms Agency 1911 |
|---|---|---|---|
| Caliber | .45 ACP | 9mm | 9mm |
| Frame Material | Stainless Steel | Polymer with Steel Chassis | Aluminum |
| Finish | Two-Tone PVD | Black Nitride | Cerakote |
| Sights | Novak Night Sights | Trijicon Suppressor Sights | Blacked Out Rear + Fiber Front |
| Recoil System | Dual Spring | Single Spring | Single Spring |
| Street Price | $1,389.94 | $1,899 | $2,495 |
| Best For | Duty-ready 1911 with factory night sights | Modular striker-fired for competition | Custom shop 1911 with hand-fitting |
FAQ
Does this pistol have a Series 80 firing pin safety?
Yes — the Colt Combat Elite Government uses the Series 80 system with a firing pin block that disengages when the trigger is pulled. This adds drop safety but introduces a small amount of trigger take-up compared to Series 70 models.
What holsters fit the two-tone PVD finish?
Any standard Government 1911 holster will work — the PVD finish is durable enough for kydex, leather, or hybrid holsters. Avoid abrasive materials like nylon with rough edges that could mar the coating over time.
Are the grips interchangeable with standard 1911 panels?
Yes — the half-checkered G10 grips use standard 1911 screw spacing, so you can swap them for wood, rubber, or aluminum grips if you prefer a different texture or color.
What is the warranty on this pistol?
Colt offers a limited lifetime warranty to the original owner for defects in materials and workmanship. Register your serial number on Colt’s site within 30 days to activate coverage.
Ready to Carry a Two-Tone 1911 with Night Sights?
Add the Colt Mfg O1070CE to your cart — it ships in 1-2 business days and includes secure checkout with 30-day returns. Semi Auto Handguns | 1911 Pistols | Colt Firearms
- ✅ Nationwide delivery (all 50 states)
- ✅ Ships 1-2 business days
- ✅ 30-day returns
- ✅ Secure checkout
Last updated: April 2026
Reviews
There are no reviews yet.